BDS Suspension 4.5" Front/ 4" Rear - Coil Springs Kit - Rubicon.
SKU
BDS1414H
Color:
None
$2,200.02
Product is Vehicle Specific
BDS Suspension 4.5" Lift Kit for the 2007-2011 Jeep Wrangler JK 4 door 4WD - Standard Jeep or Rubicon.

This kit comes with 4"  Pro-Ride Coil Springs capable of full coil bind and 3" bump stop extensionsn  to control the commpression travel.  To handle the added wheel travel,l brake line relocation brackets are included or BDS stainless steel lines are available. 

This system comes complete with front and rear fixed length lower control arms and rear upper adjustable control arms to properly control the front and rear axle positions. BDS control arms come standard with OE grade rubber bushings.  If you would like to upgrade, BDS offers adjustable arms with urtethane ends or adjustable arms w/ flex joints to fit your needs.

To improve the steering and handling geometry, BDS includes a front track bar relocation bracket and a dropped pitman arm. Fixed swaybar links are included for Rubicon models with the factory disconnect system, for non-Rubicon models choose between BDS Ultimate Sway Bar Disconnects or JKS Quicker Disconnects.  Specific for 2007 - 2011, BDS exhaust extensions are included to maintatin front driveshaft clearance at full droop. 

In the rear, an axle mounted track bar relocation bracket is included that  has a built in support gusset that ties into the bump stop pad.  JK's are known for broken welds on the factory track bar mount when wheeled hard, so BDS solved the problem with this added support.  The kit comes standard with BDS 5500 series custom valved shock absorbers for a smooth ride.

BDS carries a large selection of accessories for Jeep JK's so check out what is available for this 4.5" lift by customizing your system.

  • Tire & Wheel Combinations
  • 37" x 12.50" w/16 x 8 and 4-1/2" back spacing
  • Est. Installation: 8 hours
  • Difficulty Level (easy 1 - 5 complicated): 2

Important Kit Notes
  • 1. Will not fit 2wd models.
  • 2. The fixed front and rear lower control arms can be upgraded to the flex or adjustable arms listed in the accessories.
  • 3. The front driveshaft is maxed out at full droop and on certain models the driveshaft boot can contact the transmission pan. Replacement of the front driveshaft is recommended.
  • 7. Exhaust modification may be required.This kit is FMVSS No.126 Compliant
More Information
Product NameBDS Suspension 4.5" Front/ 4" Rear - Coil Springs Kit - Rubicon.
BrandBDS Suspension
Height6
Length18
Width12
DescriptionBDS Suspension 4.5" Lift Kit for the 2007-2011 Jeep Wrangler JK 4 door 4WD - Standard Jeep or Rubicon.

This kit comes with 4"  Pro-Ride Coil Springs capable of full coil bind and 3" bump stop extensionsn  to control the commpression travel.  To handle the added wheel travel,l brake line relocation brackets are included or BDS stainless steel lines are available. 

This system comes complete with front and rear fixed length lower control arms and rear upper adjustable control arms to properly control the front and rear axle positions. BDS control arms come standard with OE grade rubber bushings.  If you would like to upgrade, BDS offers adjustable arms with urtethane ends or adjustable arms w/ flex joints to fit your needs.

To improve the steering and handling geometry, BDS includes a front track bar relocation bracket and a dropped pitman arm. Fixed swaybar links are included for Rubicon models with the factory disconnect system, for non-Rubicon models choose between BDS Ultimate Sway Bar Disconnects or JKS Quicker Disconnects.  Specific for 2007 - 2011, BDS exhaust extensions are included to maintatin front driveshaft clearance at full droop. 

In the rear, an axle mounted track bar relocation bracket is included that  has a built in support gusset that ties into the bump stop pad.  JK's are known for broken welds on the factory track bar mount when wheeled hard, so BDS solved the problem with this added support.  The kit comes standard with BDS 5500 series custom valved shock absorbers for a smooth ride.

BDS carries a large selection of accessories for Jeep JK's so check out what is available for this 4.5" lift by customizing your system.

  • Tire & Wheel Combinations
  • 37" x 12.50" w/16 x 8 and 4-1/2" back spacing
  • Est. Installation: 8 hours
  • Difficulty Level (easy 1 - 5 complicated): 2

Important Kit Notes
  • 1. Will not fit 2wd models.
  • 2. The fixed front and rear lower control arms can be upgraded to the flex or adjustable arms listed in the accessories.
  • 3. The front driveshaft is maxed out at full droop and on certain models the driveshaft boot can contact the transmission pan. Replacement of the front driveshaft is recommended.
  • 7. Exhaust modification may be required.This kit is FMVSS No.126 Compliant
Write Your Own Review
You're reviewing:BDS Suspension 4.5" Front/ 4" Rear - Coil Springs Kit - Rubicon.