BDS Suspension 3" Front/ 3" Rear - Coil Springs Kit - Rubicon.
SKU
BDS1412H
Color:
None
$959.36
Product is Vehicle Specific
BDS Suspension 3" Lift Kit for the 2007-11 Jeep Wrangler JK 4 door 4WD - Standard Jeep or Rubicon.

Specifically intended for 2007-11 models, this system includes an exhaust extension kit that maximizes allowable wheel travel with the factory front driveshaft. 

This kit comes with 3"  Pro-Ride Coil Springs capable of full coil bind and 2" bump stop extensions to control the compression travel, but increase wheel travel. Brake line relocation brackets are supplied to handle the added wheel travel. Many companies don't include anything to correct your alignment, but BDS includes octo cam washers for the front lower control arms to fine tune the caster angle. 

Fixed swaybar links are included for Rubicon models with the factory disconnect system, for non-Rubicon models choose between BDS Ultimate Sway Bar Disconnects or JKS Quicker Disconnects.  In the rear, sway bar drop brackets are included instead of longer sway bar links to allow the use of a factory wheel and larger tire. 

To correct the rear axle shift from the lift, a rear frame mounted track bar relocation bracket is included.  The kit comes standard with BDS 5500 series custom valved shock absorbers for a smooth ride.

BDS carries a large selection of accessories for Jeep JK's so check out what is available for this 3" lift by customizing your system.

  • Tire & Wheel Combinations
  • 35" x 12.50" w/16 x 8 and 4-1/2" back spacing
  • Est. Installation: 6 hours
  • Difficulty Level (easy 1 - 5 complicated): 2

Important Kit Notes
  • 1. Will not fit 2wd models.
  • 2. This kit is FMVSS No.126 Compliant
More Information
Product NameBDS Suspension 3" Front/ 3" Rear - Coil Springs Kit - Rubicon.
BrandBDS Suspension
Height6
Length18
Width12
DescriptionBDS Suspension 3" Lift Kit for the 2007-11 Jeep Wrangler JK 4 door 4WD - Standard Jeep or Rubicon.

Specifically intended for 2007-11 models, this system includes an exhaust extension kit that maximizes allowable wheel travel with the factory front driveshaft. 

This kit comes with 3"  Pro-Ride Coil Springs capable of full coil bind and 2" bump stop extensions to control the compression travel, but increase wheel travel. Brake line relocation brackets are supplied to handle the added wheel travel. Many companies don't include anything to correct your alignment, but BDS includes octo cam washers for the front lower control arms to fine tune the caster angle. 

Fixed swaybar links are included for Rubicon models with the factory disconnect system, for non-Rubicon models choose between BDS Ultimate Sway Bar Disconnects or JKS Quicker Disconnects.  In the rear, sway bar drop brackets are included instead of longer sway bar links to allow the use of a factory wheel and larger tire. 

To correct the rear axle shift from the lift, a rear frame mounted track bar relocation bracket is included.  The kit comes standard with BDS 5500 series custom valved shock absorbers for a smooth ride.

BDS carries a large selection of accessories for Jeep JK's so check out what is available for this 3" lift by customizing your system.

  • Tire & Wheel Combinations
  • 35" x 12.50" w/16 x 8 and 4-1/2" back spacing
  • Est. Installation: 6 hours
  • Difficulty Level (easy 1 - 5 complicated): 2

Important Kit Notes
  • 1. Will not fit 2wd models.
  • 2. This kit is FMVSS No.126 Compliant
Write Your Own Review
You're reviewing:BDS Suspension 3" Front/ 3" Rear - Coil Springs Kit - Rubicon.